{"title":"Decals","description":"\u003ch2\u003eTo see product information and price, click on any of the images below.\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThere could be more, please note page numbers on the top and bottom right hand side of the photos.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eReproduced decals with thicker material, perfect for bikes that are ridden, has a clear coat, so the colour graphic is affected by scratches. \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003c\/div\u003e","products":[{"product_id":"bul-de-7400-250ta","title":"Bultaco, 1974, 250, Reproduced Tank Decal Kit","description":"\u003cp\u003e\u003cstrong\u003eProduct #: BUL-DE-7400-250TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes die-cut sides and separate round Bultaco badges.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigors of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Bultaco","offers":[{"title":"Default Title","offer_id":169150922,"sku":"BUL-DE-7400-250TA","price":52.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/BUL-DE-7400-250TA.jpg?v=1333948356"},{"product_id":"bul-de-7400-360ta","title":"Bultaco, 1974, 360, Reproduced Tank Decal Kit","description":"\u003cp\u003e\u003cstrong\u003eProduct #: BUL-DE-7400-360TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIncludes die-cut sides and separate round Bultaco badges.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Bultaco","offers":[{"title":"Default Title","offer_id":169150932,"sku":"BUL-DE-7400-360TA","price":52.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/BUL-DE-7400-360TA.jpg?v=1333948397"},{"product_id":"bul-de-7700-250ta","title":"Bultaco, 1977, Pursang 250 MK10, Reproduced Tank Decal Kit","description":"\u003cp\u003e\u003cstrong\u003eProduct #: BUL-DE-7700-250TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEasy to use self-cut tank kit includes separate round Bultaco badges, Bultaco MK 10 \u0026amp; Pursang decals.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Bultaco","offers":[{"title":"1977 \/ BUL-DE-7700-250TA \/ Pursang 250 MK 10","offer_id":169150942,"sku":"BUL-DE-7700-250TA","price":55.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/BUL-SC_7700-370_MK10_New_Blue_2.jpg?v=1518018608"},{"product_id":"bul-de-0000-360370ta","title":"Bultaco, Pursang 360\/370, Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: BUL-DE-0000-360370TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecal size approx. 9 1\/4\" x 1 1\/4\"\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Bultaco","offers":[{"title":"Default Title","offer_id":169150972,"sku":"BUL-DE-0000-360370TA","price":19.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/BUL-DE-0000-360370TA.jpg?v=1367351745"},{"product_id":"cz-de-6500-ta","title":"CZ, 1965, Twin Port, Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: CZ-DE-6500-TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":169150982,"sku":"CZ-DE-6500-TA","price":17.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/CZ-DE-6500-TA.jpg?v=1367351783"},{"product_id":"cz-de-7071-380ta","title":"CZ, 1970-71, 380 Single Port, Reproduced Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: CZ-DE-7071-380TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":169150992,"sku":"CZ-DE-7071-380TA","price":35.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/CZ-DE-7071-380TA_3.JPG?v=1449764983"},{"product_id":"cz-de-7273-ta","title":"CZ, 1972-73, Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: CZ-DE-7273-TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":169151002,"sku":"CZ-DE-7273-TA","price":17.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/CZ-DE-7273-TA.jpg?v=1367351815"},{"product_id":"cz-de-7475-ta","title":"CZ, 1974-75, Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: CZ-DE-7475-TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDecals\u003c\/span\u003e\u003cspan\u003e are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"CZ","offers":[{"title":"Default Title","offer_id":169151012,"sku":"CZ-DE-7475-TA","price":17.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/CZ-DE-7475-TA.jpg?v=1367351840"},{"product_id":"hon-de-7000-cr125sp","title":"Honda, 1970s (early 70s), CR 125M, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-7000-CR125SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151022,"sku":"HON-DE-7000-CR125SP","price":17.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-7000-CR125SP_1.jpg?v=1325707742"},{"product_id":"hon-de-7000-cr250sp","title":"Honda, 1970s (early 70s), CR 250M, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-7000-CR250SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151032,"sku":"HON-DE-7000-CR250SP","price":17.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-7000-CR250SP_1.jpg?v=1325707792"},{"product_id":"hon-de-7800-cr125sp","title":"Honda, 1978, CR 125, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-7800-CR125SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151062,"sku":"HON-DE-7800-CR125SP","price":15.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-7800-CR125SP.jpg?v=1367351875"},{"product_id":"hon-de-7800-cr250sp","title":"Honda, 1978, CR 250, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-7800-CR250SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151072,"sku":"HON-DE-7800-CR250SP","price":15.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-7800-CR250SP.jpg?v=1367351899"},{"product_id":"hon-de-7900-cr125sp","title":"Honda, 1979, CR 125, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-7900-CR125SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151092,"sku":"HON-DE-7900-CR125SP","price":15.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-7900-CR125SP.jpg?v=1367351952"},{"product_id":"hon-de-7900-cr250sp","title":"Honda, 1979, CR 250, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-7900-CR250SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151102,"sku":"HON-DE-7900-CR250SP","price":15.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-7900-CR250SP.jpg?v=1367351979"},{"product_id":"hon-de-8100-cr450ta","title":"Honda, 1981, CR 450, Tank Decal Sheets, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8100-CR450TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSet of 2, full 16\"x9\" perforated sheets. Trim to fit as you wish!\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151142,"sku":"HON-DE-8100-CR450TA","price":44.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8100-CR450TA_2.JPG?v=1449765143"},{"product_id":"hon-de-8500-cr125rad","title":"Honda, 1985, CR 125, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8500-CR125RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151162,"sku":"HON-DE-8500-CR125RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8500-CR125RAD.jpg?v=1367352072"},{"product_id":"hon-de-8500-cr250rad","title":"Honda, 1985, CR 250, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8500-CR250RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151182,"sku":"HON-DE-8500-CR250RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8500-CR250RAD.jpg?v=1367352103"},{"product_id":"hon-de-8500-cr500rad","title":"Honda, 1985, CR 500, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8500-CR500RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151192,"sku":"HON-DE-8500-CR500RAD","price":29.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8500-CR500RAD.jpg?v=1367352129"},{"product_id":"hon-de-8600-cr125rad","title":"Honda, 1986, CR 125, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8600-CR125RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151202,"sku":"HON-DE-8600-CR125RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8600-CR125RAD.jpg?v=1367352157"},{"product_id":"hon-de-8600-cr250rad","title":"Honda, 1986, CR 250, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8600-CR250RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151212,"sku":"HON-DE-8600-CR250RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8600-CR250RAD.jpg?v=1367352205"},{"product_id":"hon-de-8600-cr500rad","title":"Honda, 1986, CR 500, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8600-CR500RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151232,"sku":"HON-DE-8600-CR500RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8600-CR500RAD.jpg?v=1367352230"},{"product_id":"hon-de-8700-cr250rad","title":"Honda, 1987, CR 250, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8700-CR250RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151242,"sku":"HON-DE-8700-CR250RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8700-CR250RAD.jpg?v=1370449802"},{"product_id":"hon-de-8800-cr125rad","title":"Honda, 1988, CR 125, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8800-CR125RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151272,"sku":"HON-DE-8800-CR125RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8800-CR125RAD.jpg?v=1370415969"},{"product_id":"hon-de-8800-cr250rad","title":"Honda, 1988, CR 250, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8800-CR250RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151292,"sku":"HON-DE-8800-CR250RAD","price":29.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8800-CR250RAD.jpg?v=1367352348"},{"product_id":"hon-de-8800-cr500rad","title":"Honda, 1988, CR 500, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8800-CR500RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151302,"sku":"HON-DE-8800-CR500RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8800-CR500RAD.jpg?v=1367352377"},{"product_id":"hon-de-8900-cr250rad","title":"Honda, 1989, CR 250, Rad Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-8900-CR250RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151322,"sku":"HON-DE-8900-CR250RAD","price":29.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-8900-CR250RAD.jpg?v=1370415764"},{"product_id":"hon-de-0000-blkprosa","title":"Honda, Black outline Pro-Link Swing Arm Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-0000-BLKPROSA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecal size: 11\"x 2\"\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default \/ HON-DE-0000-BLKPROSA \/ Honda","offer_id":169151362,"sku":"HON-DE-0000-BLKPROSA","price":23.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-0000-BLKPROSA.jpg?v=1367352497"},{"product_id":"hon-de-0000-bluprosa","title":"Honda, Blue outline Pro-Link Swing Arm Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-0000-BLUPROSA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecal size: 11\"x 2\"\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151372,"sku":"HON-DE-0000-BLUPROSA","price":23.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-0000-BLUPROSA.jpg?v=1367352528"},{"product_id":"hon-de-0000-blublkprosa","title":"Honda, Blue\/Black outline Pro-Link Swing Arm Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-0000-BLUBLKPROSA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecal size: 11\"x 2\"\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151382,"sku":"HON-DE-0000-BLUBLKPROSA","price":23.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-0000-BLUBLKPROSA.jpg?v=1370416108"},{"product_id":"hon-de-0000-redprosa","title":"Honda, Red Outline Pro-Link Swing Arm Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-0000-REDPROSA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecal size: 11\"x 2\"\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151402,"sku":"HON-DE-0000-REDPROSA","price":23.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-0000-REDPROSA.jpg?v=1367352555"},{"product_id":"hon-de-0000-redblkprosa","title":"Honda, Red\/Black outline Pro-Link Swing Arm Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HON-DE-0000-REDBLKPROSA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecal size: 11\"x 2\"\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Honda","offers":[{"title":"Default Title","offer_id":169151422,"sku":"HON-DE-0000-REDBLKPROSA","price":23.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HON-DE-0000-REDBLKPROSA.jpg?v=1367352590"},{"product_id":"hus-de-7577-logota","title":"Husqvarna, 1975-77, Logo Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HUS-DE-7577-LOGOTA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSmall H, large Husqvarna, white letters and logo on clear. \u003c\/p\u003e\n\u003cp\u003e$17.95\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":169151432,"sku":"HUS-DE-7577-LOGOTA","price":17.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HUS-DE-7577-LOGOTA.jpeg?v=1322874054"},{"product_id":"hus-de-8300-cr500sp","title":"Husqvarna, 1983, 500 CR, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HUS-DE-8300-CR500SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, can be ordered in with prepayment. Email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":169151462,"sku":"HUS-DE-8300-CR500SP","price":33.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HUS-DE-8300-CR500SP_2018.jpg?v=1523382590"},{"product_id":"hus-de-8300-logota","title":"Husqvarna, 1983, Logo Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HUS-DE-8300-LOGOTA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":169151472,"sku":"HUS-DE-8300-LOGOTA","price":17.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HUS-DE-8300-LOGOTA_2018.jpg?v=1523378298"},{"product_id":"hus-de-8300-ta","title":"Husqvarna, 1983, Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HUS-DE-8300-TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":169151482,"sku":"HUS-DE-8300-TA","price":54.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/files\/HUS-DE-8300-TA.jpg?v=1709063437"},{"product_id":"hus-de-0000-aberg","title":"Husqvarna, Aberg Decal, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: HUS-DE-0000-ABERG\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Husqvarna","offers":[{"title":"Default Title","offer_id":169151592,"sku":"HUS-DE-0000-ABERG","price":9.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/HUS-DE-0000-ABERG.jpg?v=1367352903"},{"product_id":"kaw-de-7400-ta","title":"Kawasaki, 1974-76, Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: KAW-DE-7476-TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Kawasaki","offers":[{"title":"Default Title","offer_id":169151612,"sku":"KAW-DE-7476-TA","price":44.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/KAW-DE-7400-TA_1.jpg?v=1357370109"},{"product_id":"kaw-de-8700-kx500rad","title":"Kawasaki, 1987, KX 500, Rad Decals, Self Cut, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: KAW-DE-8700-KX500RAD\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOut of stock, however, can be ordered in with prepayment.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmail vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Kawasaki","offers":[{"title":"Default Title","offer_id":169151652,"sku":"KAW-DE-8700-KX500RAD","price":43.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/KAW-DE-8700-KX500RAD.JPG?v=1463065354"},{"product_id":"can-am-gas-cap-decal-new","title":"Can Am, Off Road, Gas Cap Decal, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: CAN-DE-0000-GC\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Impact Signs","offers":[{"title":"Default \/ CAN-DE-0000-GC \/ Miscellaneous","offer_id":169152262,"sku":"CAN-DE-0000-GC","price":2.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MIS-DE-000-GC_0.jpg?v=1486324666"},{"product_id":"mis-de-po75-grefndr","title":"Post 1975, Fender Strip Decal, Green, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: MIS-DE-PO75-GREFNDR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003eApply it to the fender of the 1975 and older bike to give it a great vintage look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\" style=\"font-family: Arial;\"\u003e1 decal measures 15 5\/8\" x 5 1\/4\" wide at the top (39.5cm x 13.2 cm). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Miscellaneous","offers":[{"title":"Default Title","offer_id":169152272,"sku":"MIS-DE-PO75-GREFNDR","price":21.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MIS-DE-PO75-GREFNDR_3.JPG?v=1424384045"},{"product_id":"mis-de-po75-redfndr","title":"Post 1975, Fender Strip Decal, Red, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: MIS-DE-PO75-REDFNDR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003eApply it to the fender of the 1975 and older bike to give it a great vintage look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003e1 decal measures 15 5\/8\" x 5 1\/4\" wide at the top (39.5cm x 13.2 cm). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Miscellaneous","offers":[{"title":"Default Title","offer_id":169152302,"sku":"MIS-DE-PO75-REDFNDR","price":21.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MIS-DE-PO75-REDFNDR_1.jpg?v=1424384211"},{"product_id":"mis-de-po75-whtfndr","title":"Post 1975, Fender Strip Decal, White, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: MIS-DE-PO75-WHTFNDR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003eApply it to the fender of the 1975 and older bike to give it a great vintage look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003e1 decal measures 15 5\/8\" x 5 1\/4\" wide at the top (39.5cm x 13.2 cm). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Miscellaneous","offers":[{"title":"Default Title","offer_id":169152312,"sku":"MIS-DE-PO75-WHTFNDR","price":21.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MIS-DE-PO75-WHTFNDR_1.jpg?v=1424384253"},{"product_id":"mis-de-po75-yelfndr","title":"Post 1975, Fender Strip Decal, Yellow, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: MIS-DE-PO75-YELFNDR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003eApply it to the fender of the 1975 and older bike to give it a great vintage look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003e1 decal measures 15 5\/8\" x 5 1\/4\" wide at the top (39.5cm x 13.2 cm). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Miscellaneous","offers":[{"title":"Default Title","offer_id":169152322,"sku":"MIS-DE-PO75-YELFNDR","price":21.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MIS-DE-PO75-YELFNDR_3.JPG?v=1424384297"},{"product_id":"mis-de-pr75-redfndr","title":"Pre 1975, Fender Strip Decal, Red, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: MIS-DE-PR75-REDFNDR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003eApply it to the fender of a pre 1975 bike to give it a great vintage look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003e1 decal measures 15 5\/8\" x 6 1\/4\" wide at the top (39.5cm x 16 cm). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"line-height: 1.4;\"\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Miscellaneous","offers":[{"title":"Default Title","offer_id":169152332,"sku":"MIS-DE-PR75-REDFNDR","price":21.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MIS-DE-PR75-REDFNDR_3_d2738639-b3c9-4fcc-8759-36bc6fe4b36e.JPG?v=1424384999"},{"product_id":"mis-de-pr75-whtfndr","title":"Pre 1975, Fender Strip Decal, White, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: MIS-DE-PR75-WHTFNDR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003eApply it to the fender of a pre 1975 bike to give it a great vintage look!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan face=\"Arial\"\u003e1 decal measures 15 5\/8\" x 6 1\/4\" wide at the top (39.5cm x 16 cm). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Miscellaneous","offers":[{"title":"Default Title","offer_id":169152342,"sku":"MIS-DE-PR75-WHTFNDR","price":21.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MIS-DE-PR75-WHTFNDR_3.JPG?v=1424385104"},{"product_id":"mon-de-7600-cap360ta","title":"Montesa, 1976, Cappra 360, Tank Stripes Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eProduct #: MON-DE-7600-CAP360TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net to order.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Montesa","offers":[{"title":"Default Title","offer_id":169152382,"sku":"MON-DE-7600-CAP360TA","price":39.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/MON-DE-7600-CAP360TA.jpg?v=1333397217"},{"product_id":"suz-de-7400-tm250400ta","title":"Suzuki, 1974, TM 250\/400, Tank Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: SUZ-DE-7400-TM250400TA\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eGreen with white lettering and trim.\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Suzuki","offers":[{"title":"Default Title","offer_id":169152422,"sku":"SUZ-DE-7400-TM250400TA","price":44.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/SUZ-DE-7400-TM250400TA.jpg?v=1367364658"},{"product_id":"suz-de-7900-rm125sp","title":"Suzuki, 1979, RM 125, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: SUZ-DE-7900-RM125SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003eBetter than OEM, these are made to last!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Suzuki","offers":[{"title":"Default Title","offer_id":169152452,"sku":"SUZ-DE-7900-RM125SP","price":34.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/SUZ-DE-7900-RM125SP.jpg?v=1367364693"},{"product_id":"suz-de-7900-rm250400sp","title":"Suzuki, 1979, RM 250\/400, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: SUZ-DE-7900-RM250400SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003eBetter than OEM, these are made to last!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Suzuki","offers":[{"title":"Default Title","offer_id":169152472,"sku":"SUZ-DE-7900-RM250400SP","price":34.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/SUZ-DE-7900-250400SP_4.jpg?v=1446587440"},{"product_id":"suz-de-8000-rm125sp","title":"Suzuki, 1980, RM 125, Side Panel Decals, Reproduction","description":"\u003cp\u003e\u003cstrong\u003eCan be ordered in with prepayment, email vintageroost@telus.net.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct #: SUZ-DE-8000-RM125SP\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDecals are made to withstand the rigours of motocross racing. High performance adhesive – sealed in graphics that will never fade or wear off.\u003c\/p\u003e\n\u003cp\u003eBetter than OEM, these are made to last!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe most important aspect of decal application is to make sure your tank is free of all grease, dirt, etc. Hot soapy water and isopropanol \u003c\/span\u003e\u003cspan\u003ewill do the trick. Once cleaned allow a minimum of five minutes before decal placement. Carefully align decals before removing the backing to familiarize yourself with placement then apply. Temperatures above 15 C work best. You can use a hair dryer to help shape the decal. Adhesive cures to its best bond strength after 24 hours – do not use bike until bond is cured.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePlastics\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eInjection moulded plastic like original ones or UFO are great to work with. Please note that the vacuum formed plastics in the market may require additional prep work. Use a fine sand paper and sand the area where the decal will be applied. Then, clean the area with methylated spirits (such as isopropyl), wait 10 minutes, then use a hairdryer or heat gun to go over the sticker once it is stuck in place. \u003c\/span\u003e\u003c\/p\u003e","brand":"Suzuki","offers":[{"title":"Default Title","offer_id":169152492,"sku":"SUZ-DE-8000-RM125SP","price":34.95,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/products\/SUZ-DE-8000-RM125SP.jpg?v=1367364782"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0103\/6192\/collections\/CAN-DE-7376-MX1MX2TNTTA_886d3785-e038-44f3-8be0-a3e49752a768.JPG?v=1392825402","url":"https:\/\/vintageroost.com\/collections\/decals\/ase.oembed","provider":"Vintage Roost","version":"1.0","type":"link"}